Unit 10 Research Exercise Nt1110

In: Computers and Technology

Submitted By DeezyJ
Words 2425
Pages 10
Unit 10 Research Exercise

Josue Tagle
ITT Technical Institute
NT-1110

1-What exactly is electrostatic discharge (ESD)?
Electrostatic discharge (ESD) is the sudden flow of electricity between two electrically charged objects caused by contact, an electrical short or dielectric breakdown. A buildup of static electricity can be caused by tribocharging or by electrostatic induction. The ESD occurs when differently-charged objects are brought close together or when the dielectric between them breaks down, often creating a visible spark.

2-Perform the following research about the CompTIA’s Six Steps to troubleshooting, explain EACH step in DETAIL:
Step 1: Identify the Problem
In this first step you already know that there is a problem; now you have to identify exactly what it is. This means gathering information. You do this in a few ways:
Step 2: Establish a Theory of Probable
In step 2 you theorize as to what the most likely cause of the problem is. Start with the most probable or obvious cause. For example, if a computer won’t turn on, your theory of probable cause would be that the computer is not plugged in! This step differs from other troubleshooting processes in that you are not making a list of causes but instead are choosing one probable cause as a starting point. In this step you also need to define whether it is a hardware- or software-related issue. Step 3: Test the Theory to Determine
In step 3 take your theory from step 2 and test it. Back to the example, go ahead and plug in the computer. If the computer starts, you know that your theory has been confirmed. At that point move on to step 4. But what if the computer is plugged in? Or what if you plug in the computer and it still does- not start? An experienced troubleshooter can often figure out the problem on the first theory but not always. If the first theory fails during…...

Similar Documents

Nt1110 Unit 6 Research Paper 1

...by the main server to the NAS file server. (Nerwork Attached Stroage) • NAS devices speed is typically one gigabit Ethernet connection but this can be changed to multiple gigabits, 10 gigabit, and fiber optic by adding a PCI-e network card(s). • The capacity range varies people have built 40 TB (terabyte) machines and other just have 2TB. With port replication and add-on hard drive controller cards there is hardly a limit on size. • RAID can be used on typical NAS devices. • Management features are available with NAS. • Reasons why users would want to use a NAS: 1. Power usage - All users may shutdown their computers. 2. Always on availability - All computers connected can access the data on the network. As long as the network is up and the NAS is functioning, it is always available regardless of what computers are on/off the network. 3. Centralized Storage for backup - If a computer needs to be rebuilt or wiped, you can push files and backups and restore from the same location. 4. Cost effective - Installing a RAID 1 in each computer (Mirror drive) would cost more and use more storage than perhaps a RAID 5 in the NAS with multiple PC's. This may apply more to offices than for example a small home with 2-3 PC's. Works Cited Nerwork Attached Stroage. (n.d.). Retrieved 10 26, 2012, from tech target: http://searchstorage.techtarget.com/definition/network-attached-storage...

Words: 330 - Pages: 2

Nt1110 Unit 6 Research Paper Nas

...the speed of the network adapter available on a NAS device? There are many varieties of NAS devices, depending on if you build it yourself or purchase it. The speed is usually 1GB Ethernet connection but it can be changed to multiple Gb, 10Gb, fiber optic by adding a PCIe network card(s). * What is the capacity range? The capacity range also varies. With a port replication and add on hardware drive controller cards there really isn’t a limit on size. A board that has six SATA ports can be replicated allowing for thirty drives to be attached, if 3TB drives are used in RAID 50,that would be 72TB of storage. * Is there any fault tolerance (such as RAID) built into a NAS device? If set up correctly RAID 50 is fairly stable, RAID 10 has been touted as on of the best set ups because more drives can fail at one time with having data loss. * Are management features available? Here are some management features available on a NAS device. Consider using SSL to protect the Web management interface a bare minimum. Support of protocols such as SSH for encryption of RSYNC data transfers would be excellent. SMB’s with more than two dozen users will appreciate a proper management console from which users and permissions can be managed. SMB’s that have deployed Active Directory will be looking for a NAS that supports it as well Advanced models can switch off when not in use to save power. iSCSI support. Also has the ability to sync with or back up another NAS. ......

Words: 442 - Pages: 2

Nt1110 Unit 6 Research Paper Nas

...TermPaperWarehouse.com - Free Term Papers, Essays and Research Documents The Research Paper Factory Join Search Browse Saved Papers Home Page » Computers and Technology Nt1110 Unit 6 Research Paper Nas In: Computers and Technology Nt1110 Unit 6 Research Paper Nas * What is an NAS devise? A Network Attached Storage device is file-level computer data storage connected to a computer network providing data access to a heterogeneous group of clients. NAS not only operates as a file server, but is specialized for this task either by its hardware, software, or configuration of those elements. NAS is often manufactured as a computer appliance – a specialized computer built from the ground up for storing and serving files – rather than simply a general purpose computer being used for the role. * What is the speed of the network adapter available on a NAS device? There are many varieties of NAS devices, depending on if you build it yourself or purchase it. The speed is usually 1GB Ethernet connection but it can be changed to multiple Gb, 10Gb, fiber optic by adding a PCIe network card(s). * What is the capacity range? The capacity range also varies. With a port replication and add on hardware drive controller cards there really isn’t a limit on size. A board that has six SATA ports can be replicated allowing for thirty drives to be attached, if 3TB drives are used in RAID 50,that would be 72TB of storage. * Is there any...

Words: 384 - Pages: 2

Nt1110 Research Paper Unit 4 Port Expanders

...Unit 4 Research Paper 1: Port Expanders. A Port Expander is a hardware device that allows a user to use more than one device on a single port. A good example of a port expander is a USB hub. Most USB hubs allow you to hook up 3 to 5 USB connections from only 1 USB port on your computer. The disadvantage of using a port expander is speed. The single port you are connecting to only operates at a set speed; example of this is a USB 2.0 port operates at 480 Mbit/s. If you have a portable hard drive that runs at 300 Mbit/s and a digital camera running at 180 Mbit/s that leaves 0 Mbit/s left for any other USB device on the USB hub; you could run into a bottleneck situation if you are trying to run another device at the same time. I have used several USB hubs in the past and they seemed to work really well for me. I was not using all devices I had plugged into the hub at the same time. I found it was a lot easier than plugging and unplugging devices all the time just to plug in another device. There are some advantages of using a port expander. It is generally cheaper running a port expander than to actually buying “real” ports. Port expanders are generally computer specific, however there are exceptions to that rule. USB hubs only require that a USB port is available for the hub to plug into. A port expander is also known as a port replicator. Port replicators do not add new hardware to the computer. It provides a physical connection between a device and the computer. ...

Words: 342 - Pages: 2

Nt1110 Unit 4 Research Paper Port Expander

...expander is a hardware device designed to allow more than one connection to a single port. For example if you only have 1 USB port and you had a USB Mouse and Keyboard, you can use a USB Port expander to connect to the USB port and have the USB Mouse and Keyboard connect to the port expander. 2. List the types of ports available on the expander hardware. Include screen shots of actual port expanders to your completed assignment. 1. SCSI Port Expander Hardware 2. Audio Port Expander Hardware 3. VGA Port Expander Hardware 4. RS-422 Port Expander Hardware 5. SATA Port Expander Hardware 6. Ethernet Port Expander Hardware 7. Modbus Serial Port Hardware 8. SSD Port Expander Hardware 9. SAS Port Expander Hardware 10. DB-25 Port Expander Hardware 11. USB Port Expander Hardware 12. Microphone Port Expander Hardware 13. FireWire Port Expander Hardware 14. Serial Port Expander Hardware 15. Video Port Expander Hardware 16. DVI Port Expander Hardware 3. Determine whether port expanders are made for specific types of computers, or if they are generic devices that will work with any computer. Port expanders are made to be generic and can be used on almost any computer. 4. You should also discuss the possible advantages and disadvantages of using a port expander. Advantage: Allows you to connect multiple devices to a single port. Disadvantage: The speed of the port is divided up among the devices connected to the port......

Words: 278 - Pages: 2

Nt1110 Research Paper Unit 4 Port Expanders

...Being an Effective Problem Solver and a Team Player. Ronald Davidson ITT-TECH GS1140 December 20, 2013 Unit 2 Assignment 1: Pascal’s Triangle Having an Effective Attitude for problem solving is important in improving your problem-solving skills and working with a team. It’s also important to practice the “Seven Habits of Highly Effective People: 1.Be Proactive, 2.Begin with the End in Mind, 3.Put First Things First, 4. Think Win/Win, 5. Seek Frist to Understand, Then to Be Understood, 6. Synergize, 7. Practice Renewal.” You also have to work on having the right Attitude; believe the problem can be solved. Take the right actions, Reread the problem several times, and Redescribe the problem. Work on Solution Procedures, Keep Track of Progress, Break the Problem into Sub problems, Start at a Point You Understand and last Accuracy, Check and Recheck. Understanding Paradigm shifts & Paradigm paralysis, you first must understand what a paradigm is, “It is a model or pattern based on a set of rules that define boundaries and specifies how to be successful at and within these boundaries.” A paradigm shifts can happen fast or over time, and you have at the world in a new way; you have a new set of rules, new models replacing old. A paradigm paralysis can occur when you or a company becomes stuck in there ways, and won’t change with times. When working with a team you must work together. Know your teams’ strengths and weaknesses, and use that to teams’ advantage.......

Words: 554 - Pages: 3

Nt1110 Unit 6 Research Paper Nas

...speed of the network adapter available on a NAS device? There are many varieties of NAS devices, depending on if you build it yourself or purchase it. The speed is usually 1GB Ethernet connection but it can be changed to multiple Gb, 10Gb, fiber optic by adding a PCIe network card(s). * What is the capacity range? The capacity range also varies. With a port replication and add on hardware drive controller cards there really isn’t a limit on size. A board that has six SATA ports can be replicated allowing for thirty drives to be attached, if 3TB drives are used in RAID 50,that would be 72TB of storage. * Is there any fault tolerance (such as RAID) built into a NAS device? If set up correctly RAID 50 is fairly stable, RAID 10 has been touted as on of the best set ups because more drives can fail at one time with having data loss. * Are management features available? Here are some management features available on a NAS device. Consider using SSL to protect the Web management interface a bare minimum. Support of protocols such as SSH for encryption of RSYNC data transfers would be excellent. SMB’s with more than two dozen users will appreciate a proper management console from which users and permissions can be managed. SMB’s that have deployed Active Directory will be looking for a NAS that supports it as well Advanced models can switch off when not in use to save power. iSCSI suppor...

Words: 340 - Pages: 2

Nt1210 Unit 10 Exercise 1

...Student Name: Justin Hennings Date Due: November 24, 2013 Date Submitted: November 24, 2013 Instructor: L. Chretien Subject: NT1230 Unit 10 Exercise 1 – Backup Plan How Grade: One hundred points total. Submission Requirements * Write a response to the email below by recommending solutions and explaining the rationale for your recommendations. * This is not a group project. All rules of plagiarism apply. * Cite your sources and references. * Include introductory and concluding paragraphs. Assignment Requirements Respond to the following email: -- FROM: Rebop Pakulah, Acme Engineering Company RE: Burning Smell in the server room in the US office. Hello most esteemed US computer guru, While visiting the US Office I noticed that there was a somewhat disconcerting smell in the server room. It reminded me of my uncle's cooking – somewhat burnt. I am concerned that the employees are not being responsible and having too many of their barbecue parties since we turned off their streaming Internet music to their cubicles. They swear by the Curley's barbecue sauce but I am not a fan. We are using tape backup in the server room. Could the barbecue smoke affect the tapes? I am concerned because all of our backup tapes are kept in that room. What would you suggest to take make sure the tapes are not affected by the smoke? Thank you again for you kind attention to this matter. Yours truly, Rebop Pakulah ---- Self-Assessment......

Words: 522 - Pages: 3

Unit 10 Exercise 1

...photons are completely random in orientation 3. Laser- acronym for light amplification by stimulated emission of radiation 4. Output pattern-the pattern of light produced in fiber optic that translate in the data 5. Output power – the amount of light produced by a fiber optic device 6. Modulation speed- the speed of which data is transferred over light 7. Core diameter mismatch- occurs when there is a difference in the core diameter of two optic fibers. 8. Current- the flow of electrons in a conductor 9. PIN photodiode- alight sensitive diode that conducts current in one direction only   10. Avalanche photodiode-  is a highly sensitive semiconductor electronic device that exploits the photoelectric effect to convert light to electricity. 11. Responsivity-the ratio of a detector output to input usually measured in unit of amperes per watt 12. Optical subassembly- the portion of a fiber optic receiver that guides light from the optical fiber to the photodiode 13. Dynamic range- the difference between the maximum and minimum optical input power that an optical receiver can accept 14. Operating wavelength- the wavelength at which a fiber optic receiver is designed to operate 15. Fiber optic couple- a device that connect two piece of fiber for the purpose of extent the cable or fixing a broken cable 16. Optomechanical switch- produces different optical paths from one light source 17. Optical attenuator-......

Words: 469 - Pages: 2

Nt1110 Unit 4 Research 1

...3 March 2014 NT1110 Unit 4 Research Paper 1: Port Expanders A Port Expander is a hardware device that allows a user to use more than one device on a single port. A good example of a port expander is a USB hub. Most USB hubs allow you to hook up 3 to 5 USB connections from only 1 USB port on your computer. The disadvantage of using a port expander is speed. The single ports you are connecting to, only operate at a set speed; example of this is a USB 2.0 port operates at 480 Mbit/s. If you have, a portable hard drive that runs at 300 Mbit/s and a digital camera running at 180 Mbit/s that leaves 0 Mbit/s left for any other USB device on the USB hub; you could run into a bottleneck situation if you are trying to run another device at the same time. I have used several USB hubs in the past and they seemed to work really well for me. I was not using all devices I had plugged into the hub at the same time. I found it was a lot easier than plugging and unplugging devices all the time just to plug in another device. There are some advantages of using a port expander. It is generally cheaper running a port expander than to actually buying “real” ports. Port expanders are generally computer specific; however, there are exceptions to that rule. USB hubs only require that a USB port is available for the hub to plug into. Another name for port expander is port replicator. Port replicators do not add new hardware to the computer. It provides a physical connection between a......

Words: 321 - Pages: 2

Nt1110 Unit 6 Research Paper Nas

...Strategies for the Technical Professional GRADED ASSIGNMENTS Unit 3 Assignment 1: Multiple Intelligences Course Objectives and Learning Outcomes  Due today Describe personal success strategies incorporating the need for change, study skills, overcoming challenges, and techniques of effective and efficient learners. Assignment Requirements Complete the Multiple Intelligences Assessment in your textbook (pp. 3246-3448) and then complete the Multiple Intelligences worksheet found on the next page in this graded assignment package. Required Resources  Textbook Submission Requirements  Submit the completed worksheet to your instructor during class. - 16 - 05/29/2012 Strategies for the Technical Professional GRADED ASSIGNMENTS Multiple Intelligences Name: ____________________________ Directions: Complete the Multiple Intelligences Assessment in your textbook (pp. 3246-3448) before filling out this worksheet. 1. Identify your three most dominant intelligences (highest scores) and list them below: Raymond Mock Intrapersonal a. ______________________ Interpersonal b. ______________________ c. Musical ______________________ 2. Review Figure 3.1 on p. 34.48. a. Prepare an explanation of one of the intelligences you named above. i. What are its characteristics? ii. What are its advantages/limitations? iii. What study skills work best for this type of intelligence?......

Words: 2035 - Pages: 9

Nt1110 - Unit 6, Research Paper 1: Network Attached Storage

...BRIEN TRINH NT1110 Unit 6 Research Paper 1 Network Attached Storage 1> Internet information on network-attached storage: * Definition: Network Attached Storage (NAS) is a dedicated hard drive which is set up with its own network address and provides file-level data storage services to other devices on the network. It allows both programming and files to be served faster because they are not competing for processor resources. NAS usually configured with a web browser and do not require a keyboard, mouse or monitor. Unlike other external hard drives, NAS has a processor. Some NAS devices will run using standard operating system like MS Windows, many other NAS devices use their own proprietary operating system. A NAS can store any data that appears in form of files, including email boxes, Web content, remote system backups, etc… Overall the use of a NAS parallels those traditional file servers. * NAS devices come in many varieties depending on you build it or purchase it from a vendor. The speed is usually 1GB Ethernet connection but it can be changed to multiple GB to 10GB, fiber optic by adding PCI-e network cards. * The capacity range also can be varied. If you have a port replication and add-on hardware drive controller cards, there really isn’t a limit on size. For example: if you have a board with 6 SATA ports which can be replicated (1 to 5 port) allowing 30 drives to be attached. Then if 3TB drives were used in RAID 50 that would be 72TB of......

Words: 523 - Pages: 3

Nt1110 Unit 3 Internet Research

...1 (shared with serial port 3, if present) IRQ 5 - parallel port 2 and 3 or sound card IRQ 6 - floppy disk controller IRQ 7 - parallel port 1 Used for printers or for any parallel port if a printer is not present, can also be possibly be shared with a secondary sound card IRQ 8 - real-time clock (RTC) IRQ 9 - advanced configuration and power interface system control interrupt or available for the use of peripherals configured for IRQ 2 to use IRQ 9 IRQ 10 - interrupt is left open for the use of peripherals (SCSI or NIC) IRQ 11 - interrupt is left open for the use of peripherals (SCSI or NIC) IRQ 12 - mouse or PS/2 connector IRQ 13 - CPU co-processor or integrated floating point unit or inter-processor interrupt IRQ 14 - primary ATA channel IRQ 15 - secondary ATA channel 3. Hard drives available: 250 GB, 320 GB, 500 GB, 750 GB, 1 Terabyte, 2 T, 3 T, 4 T, 5 T, 6 T, 8 T, 10 T and Western Digital released a a 12 terabyte hard drive this year filled helium to reduce friction 4. CPU - central processing unit, basically the electric circuitry of the computer that carries out the instructions of a computer program RAM - Random access memory, a "board" in your computer that allows you to read and write info regardless of how you access it, always constant where a hard drive or CD-ROM would depend on where the physical location of the info is located ROM - read only memory, mainly used for firmware, this is because the time and difficulty it takes to modify if......

Words: 506 - Pages: 3

Nt1110 Unit 10 Analysis Repair Shop

...William Jackson Unit 10 Analysis 1: Repair Shop Pros: * The user will be able to keep any pictures, files, videos, music, movies, documents, and any other things saved on the computer. The user will be able to transport these things to the new computer * With this option the user will have all the information for a new computer or a computer that has been repaired, or changed operating systems * The user will not have to pay any additional fees to store the files. * There is no need for the internet in order for the user to access any of the information. * The computer will be brand new with the same files the user has managed to accumulate over the life of the computer Cons: * Biggest downfall is the DVD’s can be scratched easily and can be physically damaged * DVD’s can also go missing or even are sometimes stolen * Some older computers don’t have the capability to write DVD’s. * There’s a cost involved in buying the DVD * The DVD doesn’t have the capacity to store games, programs, updates, and applications the user has installed Someone with a new computer will not be affected nearly as much as the others. New computers won’t have as many things saved to the computer already. Someone who has on older computer will have many more headaches involved. This user may even need to invest in multiple DVD’s and have to keep up with more DVD’s. This user will also lose all programs, updates, and applications. The business user may be complicated but...

Words: 339 - Pages: 2

Nt1330 Unit 10 Exercises

...Unit 10 In Class Assignment AD Trouble Shooting and Backup 1. What is extensible storage engine (ESE) Also known as JET Blue, is an ISAM (Indexed Sequential Access Method) data storage technology from Microsoft. How does it work? It’s purpose is to allow applications to store and retrieve data via indexed and sequential access. Numerous Windows components take advantage of ESE, such as desktop and directory. Source: http://www.google.com/#q=What+is+extensible+storage+engine+(ESE) Source: 2. Does Active directory offer any fault tolerance, if so what kind? Yes.  In any Active Directory deployment, more than one server with the Active Directory Domain Services role deployed is recommended for fault tolerance. In fact, at least two Domain Controllers are recommended as a best practice for every Domain deployed in an Active Directory forest. The reason for this is to ensure that more than one server exists at any given time with a copy of the Active Directory database. Source: http://www.techrepublic.com/blog/data-center/active-directory-virtualization- best-practices/ Yes. For fault tolerance, you should always deploy new domains with at least two domain controllers. If you only have a single domain controller for a given domain and the domain controller......

Words: 918 - Pages: 4